INCH-POUND
MIL-V-29592(AS)
4 JANUARY 1993
MILITARY SPECIFICATION
VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE
TYPE II SYSTEMS, GENERAL SPECIFICATION FOR
This specification is approved for use by the Naval Air Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers automatic hydraulic air vent valves
for use in Type II aircraft hydraulic systems with system pressurized reser-
voirs.
1.2 Classification. Automatic, hydraulic air vent valves shall be
furnished in the classes as listed below:
Actuation Method
Class
I
Mechanical by hydraulic reservoir pressure
II
Electrical by the presence of air
APPLICABLE DOCUMENTS
2.
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the
issue of the Department of Defense Index of Specifications and Standards
(DODISS) and supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, addition, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: Commanding Officer, Naval Air Warfare Center Aircraft Di-
vision Lakehurst, Systems Requirements Department, Code SR3, Lakehurst,
NJ 08733-5100, by using the self-addressed Standardization Document Im-
provement Proposal (DD Form 1426) appearing at the end of this document
or by letter.
AMSC N/A
FSC 1650
Approved for public release; distribution is unlimited.
Distribution Statement A.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business