INCH-POUND
MIL-PRF-83861D
14 August 2013
SUPERSEDING
MIL-PRF-83861C(USAF)
31 January 1998
PERFORMANCE SPECIFICATION
FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15
MICRON ABSOLUTE
This specification is approved for use by the Department of the Air Force and is available for use
by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers disposable hydraulic line filter elements that retain
all particles larger than 5 or 15 microns. For use, the element is inserted in a canister prior to use
in a hydraulic system, and is intended for use with hydraulic fluids conforming to
MIL-PRF-5606, MIL-PRF-83282, and MIL-PRF-87257.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications. The following specifications form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited
in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Oklahoma City Air
Logistics Center/ENSDAA, 3001 Staff Drive, Tinker AFB, OK 73145 or emailed to
tinker.dsp@tinker.af.mil. Since contact information can change, you may want to verify the
currency of this address using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 1650
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business