MIL-PRF-83870C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are cited in sections 3, 4, or 5 of this specification. This section does
not include documents cited in other sections of this specification or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that
they must meet all specified requirements documents cited in sections 3 or 5 of this specification, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications. The following specifications, standards, and handbooks form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
(see 6.2).
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-23699 -
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base,
NATO Code Number 0- 156
MIL-PRF-7808
-
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base
(Copies of these documents are available online at https://assist.daps.dla.mil or https://assist.daps.dla.mil/quicksearch or
from the Standardization Document Order Desk, 700Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of the documents are those cited in the solicitation or contract.
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AMS-R-83248/1 -
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set
Resistant (O-Rings, Class 1, 75 Hardness)
SAE ARP 901
-
Bubble - Point Test Method
(Application for copies should be addressed to Society of Automotive Engineers, 400 Commonwealth
Drive, Warrendale, PA 15096-0001.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 4572
-
Hydraulic Fluid Power - Filters - Multi-Pass
Method for Evaluating Filtration Performance
(Application for copies should be addressed to the International Organization for Standardization,
Case postale 56, CH-1211 Geneve 20, Switzerland).
AMERICAN NATIONAL STANDARDS INSTITUTE/AMERICAN SOCIETY FOR
QUALITY (ANSI/ASQ)
ANSI/ASQ Z1.4
-
Sampling Procedures and Tables for Inspection by
Attributes (DoD-adopted)
(Application for copies should be addressed to American Society for Quality, P.O. Box 3066, Milwaukee, WI 53201-
3066, or to the American National Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business