INCH-POUND
MIL-DTL-5500G
13 June 2014
SUPERSEDING
MIL-DTL-5500F
31 July 2013
DETAIL SPECIFICATION
CAP, HIGH PRESSURE AIR VALVE
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers one type and grade of high-pressure air valve cap
suitable for use in aircraft hydraulic systems.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of these lists, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and
standards form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Oklahoma
City Air Logistics Center/ENSDAA, 3001 Staff Drive, Suite 1AB81A, Tinker AFB, OK
73145 or emailed to ocalc.dsp@us.af.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 1650
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business