MIL-PRF-83860D
3.7 Interchangeability. All parts having the same manufacturer's part number shall be
functionally and dimensionally interchangeable.
3.8 Item identification. The filter shall be permanently and legibly marked with the
following information:
a.
Manufacturer's name
b.
Manufacturer's CAGE code
c.
Manufacturer's PN
d.
Manufacturer's lot number
e.
M83860/X-XX
f.
Expiration date of life-limited material if required by 3.4.2
The markings shall not affect the sealing or performance of the filter element.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. Qualification inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 Qualification inspection. If required (see 3.1 and 6.3), qualification shall be
performed on five filter elements of each part number. Four of the filters elements shall be
subjected to the tests indicated in table II. The remaining filter element shall be subjected to the
fungus test in 4.6.9.
4.3 Conformance inspection. Conformance inspection shall consist of the individual
tests in 4.3.1 and the sampling tests in 4.3.2.
4.3.1 Individual tests. The filter element shall be subjected to the examination in 4.6.1,
except for dimensional analysis, and the test in 4.6.2.2.
4.3.2 Sampling tests. A sample of filter elements shall be selected in accordance with
ANSI/ASQ-Z1.4-2008 at an S-1 inspection level unless modified in the procurement document
(see 6.2), and shall be subjected to the examination in 4.6.1 and the tests in 4.6.2.2, 4.6.4, and
4.6.6. One half of the sample parts shall be subjected to the test in 4.6.6 without in-line particle
sampling. The remaining half of the sample parts shall be subjected to the test in 4.6.4. If the
sample size is an odd number, the extra filter element shall be subjected to the test in 4.6.6.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business