MIL-DTL-5498G
4.7 Maintenance of qualification. At specified intervals determined by the qualifying
activity, the manufacturer must be able to demonstrate that the company still has the capabilities
and facilities necessary to produce the QPL items in accordance with this specification and the
provisions governing qualification specified in SD-6.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When packaging of materiel is to be performed by
DoD or in-house contractor personnel, these personnel need to contact the responsible packaging
activity to ascertain packaging requirements. Packaging requirements are maintained by the
inventory control point's packaging activities within the military service or defense agency, or
within the military service's system command. Packaging data retrieval is available from the
managing military department's or defense agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1 Intended use. This aircraft hydraulic accumulator is intended for use in aircraft for
both type I and type II hydraulic systems specified in SAE AS5440.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Size (see 1.2 and table I).
c. Packaging (see 5.1).
6.3 Qualification. With respect to products requiring qualification, awards will be made
only for products that are, at the time of award of contract, qualified for inclusion in QPL-5498
whether or not such products have actually been listed by that date. The attention of the
contractors is called to these requirements, and manufacturers are urged to arrange to have the
products that they propose to offer to the Federal Government tested for qualification in order that
they may be eligible to be awarded contracts or orders for the products covered by this
specification. Information pertaining to qualification of products may be obtained from DLA
Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616 or
STDZNMGT@dla.mil. An online listing of products qualified to this specification may be found
in the Qualified Products Database (QPD) at https://assist.dla.mil/.
13
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business