INCH-POUND
MIL-PRF-5503G
24 May 2013
SUPERSEDING
MIL-PRF-5503F
26 June 1998
PERFORMANCE SPECIFICATION
ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL
SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the general requirements for hydraulic linear actuators
used in any aircraft hydraulic system except for those associated with flight controls.
1.2 Classification. Actuators are of the following types (see 6.2):
Type I -
-65° to 160°F temperature range.
Type II -
-65° to 275°F temperature range.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or
not they are listed.
Comments, suggestions, or questions on this document should be addressed to Oklahoma City Air
Logistics Center/ENSDAA, 3001 Staff Drive, Tinker AFB, OK 73145 or emailed to
tinker.dsp@tinker.af.mil. Since contact information can change, you may want to verify the currency
or this address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 1650
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business