MIL-PRF-5503G
a. Manufacturer's name.
b. Manufacturer's CAGE code.
c. Manufacturer's part number.
d. Manufacturer's lot number.
e. National Stock Number (NSN).
f. Date of manufacture.
g. Serial number.
3.9 Interchangeability. All parts having the same manufacturer's part number shall be
functionally and dimensionally interchangeable.
3.10 Environmental conditions.
3.10.1 Temperature. The actuator shall operate under the following conditions:
a. A low temperature of -65°F.
b. A high temperature of 160°F for type I actuators or 275°F for type II actuators.
3.10.2 Vibration. The actuator shall withstand exposure to the vibration conditions specified in
the associated specification.
3.10.3 Sand and dust. The performance of the actuator shall be unaffected by sand and dust.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. First article inspections shall be performed on two samples in
accordance with 4.2.1, 4.2.2, and SAE AS8775.
4.2.1 First article test sample 1. The actuator shall be subjected to the following tests in the
order listed:
a.
Examination (see 4.6.1).
b.
Temperature (see 4.6.11).
c.
Sand and dust (see 4.6.12).
d.
Salt fog (see 4.6.2).
e.
Vibration (see 4.6.5).
f.
Leakage (see 4.6.6).
4.2.2 First article test sample 2. The actuator shall be subjected to the following tests in the
order listed:
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business