MIL-V-29592(AS)
STANDARDS
MILITARY
Sampling Procedures and Tables for Inspection By
MIL-STD-105
Attributes
Marking for Shipment and Storage
MIL-STD-129
Identification Marking of U.S. Military Property
MIL-STD-130
MIL-STD-81O
Environmental Test Methods and Engineering Guidelines
MIL-STD-889
Dissimilar Metals
MIL-STD-2073-1
DoD Materiel Procedures for Development and
Application of Packaging Requirements
(Unless otherwise indicated, copies of federal and military specifications and
standards are available from the Standardization Documents Order Desk, Building 4D,
700 Robbins Avenue, Philadelphia, PA 19111-5094.).
2.2 Non-Government publications. The following document forms a part of
this document to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DOD adopted are those listed in the Issue of
the DODISS cited in the solicitation. Unless otherwise specified, the Issues
of documents not listed in the DODISS are the issues of the documents cited in
the solicitation (see 6.2).
SOCITY OF AUTOMOTIVE ENGINEERS
ARP 1383
Impulse Testing of Hydraulic Actuators, Valves,
Pressure Containers and Similar Fluid System Components
(Application for copies should be addressed to the Society of Automotive
Engineers, 400 Commonwealth Drive, Warrendale, PA 15096.)
(Non-Government standards and other publications are normally available from
the organizations that prepare or distribute the documents. These documents also
may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein (except for related associated
detail specifications, specification sheets, or MS standards), the text of
this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected
to first article inspection (see 6.4) in accordance with 4.4.
3.2 General specification. The requirements of MIL-H-8775 apply as
requirements of this specification.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business