MIL-DTL-5508C
TABLE I. Size - rated volumetric capacity.
Rated volumetric capacity (cubic inches)
AN dash
Specification
number
10
20
40
60
80
120 160 200 250
AN6281
8
X
X
X
X
X
X
X
X
X
AN6282
8
X
X
X
X
X
X
X
X
X
1.5 Part or identifying number (PIN). The PIN to be used for fuses acquired to this
specification is created as follows:
AN XXXX - 8 - XXX
Size (rated capacity): (see 1.4)
Class (AN dash number)
Type I = 6281 (see 1.3)
Type II = 6282 (see 1.3)
AN prefix
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of the documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications. The following specifications form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited
in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-G-5514
- Gland Design; Packings, Hydraulic, General
Requirements for.
MIL-PRF-5606
- Hydraulic Fluid, Petroleum Base; Aircraft, Missile,
and Ordnance.
MIL-PRF-6083
- Hydraulic Fluid, Petroleum Base, for Preservation
and Operation.
AN6281
- Fuse - Hydraulic Quantity Measuring, Class 3000,
Type I.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business