MIL-DTL-5508C
SAE INTERNATIONAL
SAE AMS 2460
- Plating, Chromium.
SAE ARP 5316
- Storage of Elastomer Seals and Seal Assemblies
Which Include an Elastomer Element Prior to
Hardware Assembly.
SAE AS1933
- Age Controls for Hose Containing Age-Sensitive
Elastomeric Material.
SAE AS5202
- Port or Fitting End, Internal Straight Thread, Design
Standard.
SAE AS5440
- Hydraulic Systems, Aircraft, Design and Installation
Requirements for.
SAE AS8775
- Hydraulic System Components, Aircraft and Missiles,
General Specification for.
(Copies of these documents are available online at https://www.sae.org/ or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein
and in accordance with the applicable specification sheet. In the event of any conflict between
the requirements of this specification and the specification sheet, the latter shall govern.
3.2 General requirements. The requirements of SAE AS8775 apply as requirements of this
specification. Where the two specifications conflict, this specification shall govern.
3.3 Qualification. Fuses furnished under this specification shall be products that are
authorized by the qualifying activity for listing on the applicable qualified products list (QPL)
3.4 Materials.
3.4.1 Non-metallic packings and seals. The use of non-metallic packings on moving
parts shall be kept to a minimum. If used, non-metallic seals and their installation shall be in
accordance with MIL-G-5514.
3.4.2 Steel parts. Steel parts, except those in constant contact with hydraulic fluid,
shall be coated with ion vapor deposited aluminum, where practicable, in accordance with
MIL-DTL-83488, type I or type II, as applicable, and of a class that is adequate to achieve the
degree of protection required. Steel parts may also be zinc plated in accordance with ASTM B 633
or chromium plated in accordance with SAE AMS 2460. Other protective coating, in lieu of any of
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business